Sflow Max-Header-Size Extended - Dell C9000 Series Reference Manual

The following is a list of the Dell Networking OS version history for this command.
Version
9.10(0.0)
9.9(0.0)
9.8(0.0P5)
9.8(0.0P2)
9.7(0.0)
9.0.2.0
8.3.19.0
8.3.11.1
8.3.7.0
8.2.1.0
8.1.1.0
7.7.1.0
7.6.1.0
7.4.1.0
Usage Information Dell Networking OS enhances the sflow implementation for real time traffic analysis on
the E-Series to provide extended gateway information in cases where the destination IP
addresses are learned by different routing protocols and for cases where the
destination is reachable over ECMP.
Use this command in Configuration Terminal Batch mode to enable the packing
information in a dual-homing setup.
Related
show sflow
Commands

sflow max-header-size extended

Set the maximum header size of a packet to 256 bytes.
C9000 Series
Syntax
sflow max-header-size extended
Description
Introduced the Configuration Terminal Batch mode on C9010.
Introduced on the C9010.
Introduced on the S4048-ON.
Introduced on the S3048-ON.
Introduced on the S6000-ON.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on S-Series Stacking.
Introduced on the E-Series ExaScale.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
— displays the sFlow configuration.
sFlow 2031