Dell C9000 Series Reference Manual page 2026

max-datagram-
size number
vrf management
Defaults Not configured.
Command Modes
CONFIGURATION
CONFIGURATION TERMINAL BATCH
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.10(0.0)
9.9(0.0)
9.8(0.0P5)
9.8(0.0P2)
9.7(0.0)
9.4.(0.0)
9.0.2.0
8.3.19.0
8.3.11.1
8.4.2.3
8.4.1.1
8.3.7.0
8.2.1.0
8.1.1.0
7.7.1.0
7.6.1.0
6.5.1.0
(OPTIONAL) Enter the keyword max-datagram-size then the
size number in bytes. The range is from 400 to 1500. The default
is 1400.
(OPTIONAL) Enter the keyword vrf followed by the keyword
management to configure the collector device corresponding to
the default VRF and the management VRF respectively.
Description
Introduced the Configuration Terminal Batch mode on C9010.
Introduced on the C9010.
Introduced on the S4048-ON.
Introduced on the S3048-ON.
Introduced on the S6000-ON.
Added support for VRF.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Added support for IPv6 sFlow collectors and agents on the E-
series TeraScale, C-Series, and S-Series.
Added support for IPv6 sFlow collectors and agents on the E-
series ExaScale.
Introduced on the S4810.
Introduced S-Series Stacking.
Introduced on the E-Series ExaScale.
Introduced on the S-Series.
Introduced on the C-Series.
Expanded the no form of the command to mirror the syntax
used to configure.
sFlow 2026