Dot1X Supplicant-Timeout - Dell C9000 Series Reference Manual

Parameters
seconds
Defaults 30 seconds
Command Modes INTERFACE
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
7.6.1.0
7.4.1.0

dot1x supplicant-timeout

Configure the amount of time after which exchanges with the supplicant time-out.
C9000 Series
Syntax
dot1x supplicant-timeout seconds
To return to the default, use theno dot1x supplicant-timeout command.
Parameters
seconds
Defaults 30 seconds
Command Modes INTERFACE
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Enter a time-out value in seconds. The range is from 1 to 300,
where 300 is implementation dependant. The default is 30.
Description
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the C-Series and S-Series.
Introduced on the E-Series.
Enter a time-out value in seconds. The range is from 1 to 300,
where 300 is implementation dependant. The default is 30.
Security 1974