Timeout Login Response - Dell C9000 Series Reference Manual

Field
Location
Example
Dell#show users
Authorization Mode:
Line
0 console 0
*3 vty 1
4 vty 2
Related username
Commands

timeout login response

Specify how long the software waits for the login input (for example, the user name and password) before
timing out.
C9000 Series
Syntax
timeout login response seconds
To return to the default values, use the no timeout login response command.
Parameters
seconds
Defaults See the defaults settings shown in Parameters.
Command Modes LINE
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.2(1.0)
Description
Displays the IP address of the user.
role or privilege
User Role
admin sysadmin
sec1 secadmin
ml1 netadmin
— use to enter the user name.
Enter a number of seconds the software waits before logging
you out. The range is:
• VTY: the range is from 1 to 30 seconds, the default is 30
seconds.
• Console: the range is from 1 to 300 seconds, the default is
0 seconds (no timeout).
• AUX: the range is from 1 to 300 seconds, the default is 0
seconds (no timeout).
Description
Introduced on the C9010.
Introduced on the Z9500.
Privilege Host(s) Location
15 idle
14 idle
12 idle
172.31.1.4
172.31.1.5
Security 1948