Rmon Collection History - Dell C9000 Series Reference Manual

owner string
Defaults owner
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
7.6.1.0
7.5.1.0
6.1.1.0

rmon collection history

Enable the RMON MIB history group of statistics collection on an interface.
C9000 Series
Syntax
rmon collection history {controlEntry integer} [owner name]
[buckets number] [interval seconds]
To remove a specified RMON history group of statistics collection, use the no rmon
collection history {controlEntry integer} command.
Parameters
controlEntry
integer
(OPTIONAL) Enter the keyword owner then the owner name to
specify an owner for the alarm. This is the alarmOwner object in
the alarmTable of the RMON MIB.
Description
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
Enter the keyword controlEntry to specify the RMON group
of statistics using a value. Then enter an integer value from 1 to
65535 that identifies the RMON group of statistics. The integer
value must be a unique index in the RMON history table.
Remote Monitoring (RMON) 1867