Dell C9000 Series Reference Manual page 1870

Parameters
number
log
trap community
description string
owner name
Defaults As noted in the Parameters section.
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
7.6.1.0
7.5.1.0
6.1.1.0
Assign an event number in integer format from 1 to 65535. The
number value must be unique in the RMON event table.
(OPTIONAL) Enter the keyword log to generate an RMON log
entry. The log entry is triggered and sets the eventType in the
RMON MIB to log or log-and-trap. The default is No log.
(OPTIONAL) Enter the keyword trap then an SNMP community
string to configure the eventType setting in the RMON MIB. This
keyword sets either snmp-trap or log-and-trap. The default is
public.
(OPTIONAL) Enter the keyword description then a string
describing the event.
(OPTIONAL) Enter the keyword owner then the name of the
owner of this event.
Description
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
Remote Monitoring (RMON) 1870