Bridge-Priority - Dell C9000 Series Reference Manual

Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.0.2.0
8.3.19.0
8.3.11.1
8.2.1.0

bridge-priority

Set the bridge priority of the switch in an IEEE 802.1D spanning tree.
C9000 Series
Syntax
bridge-priority {priority-value | primary | secondary}
To return to the default value, use the no bridge-priority command.
Parameters
priority-value
primary
secondary
Defaults priority-value = 32768
Command Modes SPANNING TREE (The prompt is "config-stp".)
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
Description
Introduced on the C9010.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the S4810.
Introduced on the C-Series and S-Series.
Enter a number as the bridge priority value. The range is from 0
to 65535. The default is 32768.
Enter the keyword primary to designate the bridge as the root
bridge.
Enter the keyword secondary to designate the bridge as a
secondary root bridge.
Description
Introduced on the C9010.
Spanning Tree Protocol (STP) 2108