Dell C9000 Series Reference Manual page 1986

To disable hostbased-authentication for SSHv2 server, use the no ip ssh
hostbased-authentication enable command.
Parameters
enable
Defaults Disabled.
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
7.6.1.0
7.5.1.0
6.1.1.0
Usage Information If you enable this command, clients can log in without a password prompt. This
command provides two levels of authentication:
•
•
Related
ip ssh pub-key-file
Commands
ip ssh rhostsfile
Enter the keyword enable to enable hostbased-authentication
for SSHv2 server.
Description
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
rhost-authentication is done with the file specified in the ip ssh rhostfile
command.
checking client host-keys is done with the file specified in the ip ssh pub-key-
file command.
NOTE: Administrators must specify the two files (rhosts and pub-key-file) to
configure host-based authentication.
— public keys of trusted hosts from a file.
— trusted hosts and users for rhost authentication.
Security 1986