Dell C9000 Series Reference Manual page 1552

Item
TenGigabitEthern
et...
Internet Address...
Process ID...
Transmit Delay...
Designated
Router...
Backup
Designated...
Timer intervals...
Hello due...
Neighbor Count...
Example
Dell>show ip ospf int
TenGigabitEthernet 1/17 is up, line protocol is up
Cost: 1
192.168.1.2
192.168.1.1
Retransmit 5
Router)
TenGigabitEthernet 1/23 is up, line protocol is up
Cost: 1
192.168.0.4
192.168.0.2
Retransmit 5
Description
This line identifies the interface type slot/port and the status of
the OSPF protocol on that interface.
This line displays the IP address, network mask and area
assigned to this interface.
This line displays the OSPF Process ID, Router ID, Network type
and cost metric for this interface.
This line displays the interface's settings for Transmit Delay,
State, and Priority. In the State setting, BDR is Backup
Designated Router.
This line displays the ID of the Designated Router and its
interface address.
This line displays the ID of the Backup Designated Router and its
interface address.
This line displays the interface's timer settings for Hello interval,
Dead interval, Transmit Delay (Wait), and Retransmit Interval.
This line displays the amount time until the next Hello packet is
sent out this interface.
This line displays the number of neighbors and adjacent
neighbors. Listed below this line are the details about each
adjacent neighbor.
Internet Address 192.168.1.2/30, Area 0.0.0.1
Process ID 1, Router ID 192.168.253.2, Network Type BROADCAST,
Transmit Delay is 1 sec, State DR, Priority 1
Designated Router (ID) 192.168.253.2, Interface address
Backup Designated Router (ID) 192.168.253.1, Interface address
Timer intervals configured, Hello 10, Dead 40, Wait 40,
Hello due in 00:00:02
Neighbor Count is 1, Adjacent neighbor count is 1
Adjacent with neighbor 192.168.253.1 (Backup Designated
Internet Address 192.168.0.1/24, Area 0.0.0.1
Process ID 1, Router ID 192.168.253.2, Network Type BROADCAST,
Transmit Delay is 1 sec, State DROTHER, Priority 1
Designated Router (ID) 192.168.253.5, Interface address
Backup Designated Router (ID) 192.168.253.3, Interface address
Timer intervals configured, Hello 10, Dead 40, Wait 40,
Open Shortest Path First (OSPFv2 and OSPFv3) 1552