Show Protocol-Tunnel - Dell C9000 Series Reference Manual

show protocol-tunnel

Display protocol tunnel information for all or a specified VLAN-Stack VLAN.
C9000 Series
Syntax
show protocol-tunnel [vlan vlan-id]
Parameters
vlan vlan-id
Defaults none
Command Modes EXEC
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
8.2.1.0
7.4.1.0
Example
Dell#show protocol-tunnel
VLAN
4001
4002
Dell#
Dell#show protocol-tunnel vlan 4001
VLAN
4001
Example (Specific
Dell#show protocol-tunnel vlan 2
VLAN)
System Rate-Limit: 1000 Frames/second
(OPTIONAL) Enter the keyword vlan then the VLAN ID to
display information for the one VLAN. The range is from 1 to
4094.
Description
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the C-Series, E-Series and E-Series ExaScale.
Introduced
Protocols Rate-limit(Kbps)
STP,PVST -
STP,PVST -
Protocols Rate-limit(Kbps)
STP,PVST -
Interface
Te 1/17 Te 1/19
Te 1/16 Te 1/18
Interface
Te 1/17 Te 1/19
Service Provider Bridging 2022