Enable; Server - Dell C9000 Series Reference Manual

Version
9.9(0.0)
Usage Information Each contact person must be unique by their name.
You can configure only one contact person.
It is not possible to remove the first name or last name. The no form of the command
removes the entire contact-person entry.
This command is optional for SupportAssist service configuration.

enable

Enable all activities and severs for the SupportAssist service.
Syntax
enable all
To return to the default setting, use the no enable all command.
Parameters
all
Defaults Enabled or All Enabled
Command Modes SUPPORTASSIST
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
Version
9.10(0.0)
9.9(0.0)

server

Configure the name of the remote SupportAssist Server and move to SupportAssist Server mode.
Syntax
server {default | server-name}
To delete a server, use the no server server-name command.
Description
Introduced on the S4810, S4820T, S3048–ON, S4048–ON,
S5000, S6000, S6000–ON, Z9500, MXL.
Enter the keyword all to enable all SupportAssist service
activities.
Description
Introduced on the C9010, Z9100–ON, S6100–ON, and S3100
series.
Introduced on the S4810, S4820T, S3048–ON, S4048–ON,
S5000, S6000, S6000–ON, Z9500, MXL.
SupportAssist 2140