Chapter 3 — Configure the Computer
Configure the Computer Remotely with
SmartSystems
About Network Communications
About 802.11 Radio Communications
About Bluetooth Communications
38
You can use Intermec Settings from a SmartSystems console to remotely
configure all the Intermec computers. For help using Intermec Settings,
click Help > Contents. For information on all the parameters in Intermec
Settings, see the
Intermec Settings Command Reference
1 In the SmartSystems console, select a computer and then right-click
on it. A list appears.
2 Select Start Intermec Settings.
3 Configure the settings you want to change. As you select parameters,
help for each parameter appears in the upper right pane.
4 When you are done making changes, select File > Save Settings.
You can use the mobile computer in your wireless or wired data collection
network. You can connect your computer using:
•
802.11 radio communications.
•
Ethernet communications.
•
Bluetooth communications.
•
USB and serial communications.
The computer has an 801.11a/b/g/n radio to transfer data using wireless
communications. Before you configure radio communications, you need
to set up your wireless network, including your access points.
The computer is Bluetooth-enabled, which lets you connect to these
Bluetooth devices:
•
Scanners
•
Printers
•
Audio devices
•
Wireless readers
Thor CV31 Vehicle-Mount Computer User Manual
Manual.