Installing Bucket - Makita DCU180 Instruction Manual

Assembling and installing carrier
Optional accessory
1. Take out the carrier from the box, attach the side
rails to the base frame, and then tighten the thumb nuts
1
1. Thumb nut
2. Place the carrier on the base unit, and then insert
the hexagonal bolts and washers into the frames from
the top. Tighten the washers and spring washers and
3
4
5
1. Long hexagonal bolt 2. Short hexagonal bolt
3. Washer 4. Spring washer 5.
NOTICE:
short bolts for the rear.

Installing bucket

Optional accessory
1
Place the bucket on the base unit, insert the hexagonal bolts
into the frames, and then tighten the washers and spring
1
2
3
4
1. Hexagonal bolt 2. Washer 3. Spring washer 4.
11 ENGLISH
1
Use the long bolts for the front, and the
2
3
1