Dumping Objects - Makita DCU180 Instruction Manual

1
1. Switch trigger
Loading objects
CAUTION:
Before loading objects on the machine,
make sure that the power is off and the brake lever is locked.
CAUTION:
If the rear wheels are installed,
make sure that the rear wheel brake is locked
before loading objects on the machine.
CAUTION:
Before loading objects on the
machine, make sure that the carrier or bucket is locked.
CAUTION:
Be sure to load objects within the
carrier or bucket.
or bucket, they may fall or collapse if they touch obstacles.
CAUTION:
Be sure to load objects so that
they are below eye level. If the load is too high, it is
dangerous because the view is obscured. Also, there
likely to be unbalanced.
with ropes and tie them down to the rope hooks.

Dumping objects

CAUTION:
and stable ground. Operation on unstable ground
or bucket.
1. Stop the machine, and then lock the brakes.
NOTICE:
It is recommended to block the front
wheel to stabilize the machine.
2. Release the lock lever.
3. Stand at the side of the machine, hold the handle
with one hand, and then lift and tilt the carrier or bucket
by pushing up the carrier frame with the other hand.
CAUTION:
Hold the handle and carrier frame
CAUTION:
Keep the load to a minimum. If the
load is large, do not try to lift the carrier. Reduce
the load, and then lift the carrier.
CAUTION:
After dumping the objects, be sure
to lock the carrier or bucket.
18 ENGLISH