Installing Bucket - Makita DCU180Z Instruction Manual

Assembling and installing carrier
Optional accessory
1. Take out the carrier from the box, attach the side
rails to the base frame, and then tighten the thumb nuts
to fix the rails.
1
► 1 . Thumb nut
2. Place the carrier on the base unit, and then insert
the hexagonal bolts and washers into the frames from
the top. Tighten the washers and spring washers and
butterfly nuts from the bottom to fix the carrier.
3
4
5
► 1 . Long hexagonal bolt 2. Short hexagonal bolt
3. Washer 4. Spring washer 5. Butterfly nut
NOTICE:
short bolts for the rear.

Installing bucket

Optional accessory
1
Place the bucket on the base unit, insert the hexagonal bolts
into the frames, and then tighten the washers and spring
washers and butterfly nuts from the bottom to fix the bucket.
1
2
3
4
► 1. Hexagonal bolt 2. Washer 3. Spring washer 4. Butterfly nut
11 ENGLISH
1
Use the long bolts for the front, and the
2
3
1