Makita DCU180 Instruction Manual page 9

5. Raise the handles, and then insert them into the
base unit.
A
NOTICE:
Do not allow the cords inside area "A"
cords and cause accidents.
NOTICE:
Do not apply excessive force to the
cords when raising and inserting the handles.
NOTICE:
Be sure to raise the handles with both
hands.
6. Open the carrier frame toward the front.
1
1. Carrier frame
7. Unfold the handles, then insert the long hexagonal
bolts into the base unit, and then tighten the nuts with
the wrench included in the package.
1
1. Long hexagonal bolt
8. Tighten the shoulder bolts from the rear using the
wrench included in the package.
1. Shoulder bolt
9. Tighten the short hexagonal bolts from both sides
handles.
1
1. Short hexagonal bolt
NOTICE:
Do not tighten the short hexagonal
bolts with excessive force. Tighten them with
NOTICE:
Do not pinch the cords with the bolts.
10. Fix the cords with the clamps.
9 ENGLISH
1
1
1