Maintenance - Makita DCU180 Instruction Manual

MAINTENANCE

CAUTION:
Always be sure to park the machine
or attempting to perform inspections or maintenance.
CAUTION:
If the rear wheels are installed,
make sure that the rear wheel brake is locked
before storage, inspections, or maintenance.
CAUTION:
Always be sure that the lock key
and battery cartridge are removed from the machine
before storage, inspections, or maintenance.
CAUTION:
Always remove the lock key when
the machine is not in use. Store the lock key in a
safe place out of reach of children.
Periodic checks
lever is fully pulled down.
1
1. Carrier lock 2. Lock lever
dle when you fully pull the lever, the brake is not
working properly. Adjust the brake, or ask your
local Makita Service Center for repairs.
Cleaning the machine
NOTICE:
alcohol or the like. Discoloration, deformation or
cracks may result.
NOTICE:
bucket when cleaning the machine with running
water. Do not use the high pressure washer for
cleaning.
Remove mud, dirt, and the like from the machine. Clean
the machine with running water. After the cleaning, wipe
the machine with a dry cloth.
Storage
Remove the lock key. Store the machine in a safe place
out of the reach of children.
When storing the machine, the handles can be turned
2
toward the front. Remove the short hexagonal bolts
and shoulder bolts using the wrench included in the
package. Turn the handles toward the outside, and then
rotate the handles to the front. Tighten the shoulder
2
19 ENGLISH
1. Brake lever
WARNING:
If the brake lever reaches the han-
Never use gasoline, benzine, thinner,
Pour the water below the carrier or
1. Shoulder bolt 2. Short hexagonal bolt
1
2
1