Video Configuration; Xconfiguration Video Defaultmainsource; Xconfiguration Video Input Connector [1 - Cisco TelePresence MX700 Reference Manual

Cisco TelePresence MX700 and MX800

Introduction

Video configuration

xConfiguration Video DefaultMainSource

Define which video input source shall be used as the main video source.
Requires user role: USER
Default value: 1
USAGE:
xConfiguration Video DefaultMainSource:
where
DefaultMainSource
: 1/2/3/4
Set the source to be used as the main video source.
xConfiguration Video Input Connector [1..5] CameraControl Mode
Define whether the camera that is connected to this video input connector can be controlled or
not.
Note that camera control is not available for Connector 5 (S-video/Composite).
Requires user role: ADMIN
Default value: Connector 1, 2, 3: On Connector 4, 5: Off
USAGE:
xConfiguration Video Input Connector
where
Mode
: Connector 1, 2, 3, 4: Off/On Connector 5: Off
Off: Disable camera control.
On: Enable camera control.
Cisco TelePresence MX700 and MX800 API Reference Guide CE8.0, FEBRUARY 2016.
D15335.02
About the API xConfiguration xConfiguration
DefaultMainSource
CameraControl Mode:
n Mode
xCommand
xConfiguration Video Input Connector [1..5] CameraControl CameraId
The camera ID is a unique identifier of the cameras that are connected to the video input. Use
the xStatus Camera API command to see the IDs of the different cameras.
Requires user role: ADMIN
Default value: Connector n: n Connector 5: 1
USAGE:
xConfiguration Video Input Connector
where
CameraId
: Connector 1, 2, 3, 4: 1/2/3/4/5/6/7 Connector 5: 1
Select the ID of the camera.
xConfiguration Video Input Connector [1..5] InputSourceType
Select which type of input source is connected to the video input.
Requires user role: ADMIN
Default value: Connector 1 and 2: camera Connector 3 and 4: PC Connector 5: other
USAGE:
xConfiguration Video Input Connector
where
n
: Index that identifies the input connector. Range: 1..5
InputSourceType
: camera/PC/mediaplayer/document_camera/whiteboard/other
camera: Use this when a camera is connected to the video input.
PC: Use this when a computer is connected to the video input.
mediaplayer: Use this when a media player is connected to the video input.
document_camera: Use this when a document camera is connected to the video input.
whiteboard: Use this when a whiteboard camera is connected to the video input.
other: Use this when the other options do not match.
82
API Reference Guide
xStatus Appendices
n CameraControl CameraId: CameraId
n InputSourceType: InputSourceType
Copyright © 2016 Cisco Systems, Inc. All rights reserved.