Cisco TelePresence MX700 Reference Manual page 6

Cisco TelePresence MX700 and MX800

Introduction Introduction
• When activating the VU meter on the web interface to
test the audio levels.
The color indications, green for active and red for muted,
have not changed.
Resolution changes
Collaboration Endpoint Software only supports displays that
support 16:9 or 16:10 resolutions.
Supports WUXGA (1920 × 1200) presentation sharing both
locally and in a call.
Remote monitoring
For increased security, it is only possible to take snapshots of
the local and far end video streams from the video system's
web interface, when a Remote Monitoring option key is
installed on the video system.
Remote monitoring is enabled once the option key is added,
and the video system is rebooted.
No warning messages or indicators are sent to the users
of the video system. Please provide adequate notice to the
users that the system administrator may monitor and control
the camera and screen.
Removed features
• MultiWay is no longer supported. CUCM ad hoc confer-
encing or hosted conferences may be used instead.
• Cisco CTMS is no longer supported. Other multipoint
conferencing solutions (involving Cisco TelePresence
Server, Cisco TelePresence MCU, and/or Cisco
TelePresence Conductor) may be used instead.
• Custom video layouts and video composition using TC
Console is not supported.
• MediaNet is no longer supported.
Cisco TelePresence MX700 and MX800 API Reference Guide CE8.0, FEBRUARY 2016.
D15335.02
About the API xConfiguration xCommand
6
API Reference Guide
xStatus Appendices
Copyright © 2016 Cisco Systems, Inc. All rights reserved.