Video Configuration; Xconfiguration Video Defaultmainsource; Xconfiguration Video Input Connector [1 - Cisco TelePresence SX10 Reference Manual

Cisco TelePresence SX10

Introduction

Video configuration

xConfiguration Video DefaultMainSource

Define which video input source shall be used as the main video source.
Requires user role: ADMIN, USER
Default value: 1
USAGE:
xConfiguration Video DefaultMainSource:
where
: 1
DefaultMainSource
Set the source to be used as the main video source.
xConfiguration Video Input Connector [1..3] CameraControl Mode
Define whether the camera that is connected to this video input connector can be controlled or
not.
Note that camera control is not available for Connector 2 (HDMI) and Connector 3 (VGA).
Requires user role: ADMIN, INTEGRATOR
Default value: Connector 1: On Connector 2,3: Off
USAGE:
xConfiguration Video Input Connector
where
: Unique ID that identifies the video input connector. Range: 1..3
n
: Connector 1: Off/On Connector 2,3: Off
Mode
Off: Disable camera control.
On: Enable camera control.
Cisco TelePresence SX10 API Reference Guide CE9.1, JUNE 2017.
D15333.07
About the API xConfiguration xConfiguration
DefaultMainSource
n CameraControl Mode: Mode
xCommand
xConfiguration Video Input Connector [1..3] CameraControl CameraId
The camera ID is a unique identifier of the cameras that are connected to the video input.
Requires user role: ADMIN, INTEGRATOR
Default value: 1
USAGE:
xConfiguration Video Input Connector
where
: Unique ID that identifies the video input connector. Range: 1..3
n
: 1
CameraId
The camera ID is fixed and cannot be changed.
xConfiguration Video Input Connector [1..3] InputSourceType
Select which type of input source is connected to the video input.
Note that Connector 1 is the system's integrated camera.
Requires user role: ADMIN, INTEGRATOR
Default value: Connector 1: camera Other connectors: PC
USAGE:
xConfiguration Video Input Connector
where
: Unique ID that identifies the video input connector. Range: 1..3
n
: Connector 1: camera Other connectors: PC/camera/document_camera/
InputSourceType
mediaplayer/whiteboard/other
Camera: Use this when a camera is connected to the video input.
Document_camera: Use this when a document camera is connected to the video input.
Mediaplayer: Use this when a media player is connected to the video input.
PC: Use this when a computer is connected to the video input.
Whiteboard: Use this when a whiteboard camera is connected to the video input.
Other: Use this when the other options do not match.
77
API Reference Guide
xStatus Appendices
n CameraControl CameraId: CameraId
n InputSourceType: InputSourceType
Copyright © 2017 Cisco Systems, Inc. All rights reserved.