Honda ACCORD HYBRID 2005 Service Manual page 1492

Consoles
Center Console Armrest Disassembly/Reassembly (cont'd)
4. Insert a large flat-tip screwdriver w r a p p e d w i t h
protective tape into the center of the gap between
the console armrest (A) and the console armrest
base (B), and gently push it straight d o w n until both
inside hooks (C) of the console armrest come off
the stop portions (D) of the console base.
NOTE: Apply protective tape (E) to the projection in
the back surface of the console armrest to prevent
damage.
C
5. Slightly slide the console armrest f o r w a r d to get
the inside hooks over the stop portions, then
remove the flat-tip screwdriver f r o m the gap.
6. Remove the console armrest (A) f r o m the guide
rails of the console armrest base (B).
7. Remove the screws, then r e m o v e the slide bracket
(A).
Fastener Locations
• : S c r e w , 4
8. Separate the console armrest upper base (A) f r o m
the lower base (B). Remove the screws, then
remove the armrest lock (C) and the tray lock (D)
f r o m the upper base.
Fastener Locations
• : S c r e w , 3
9. Reassemble the console armrest in the reverse
order of diassembly.
20-64