Honda ACCORD HYBRID 2005 Service Manual page 1948

Seat Heaters
S e a t H e a t e r T e s t
Driver's Seat
1. Remove the driver's seat (see page 20-80).
2. Disconnect the 4P connector (A) and 2P connector
(B) f r o m the seat heater.
B
Wire side of f e m a l e t e r m i n a l s
3. Check for continuity between the B1 and B2
terminals of the seat-back heater 2P connector.
There should be continuity.
4. Check for continuity between the A1 a n d A 2
terminals, and the A1 and B2 terminals. There
should be continuity.
5. If the continuity check is not as specified, replace
the seat heater.
Front Passenger's Seat
1. Remove the passenger's seat (see page 20-80).
2. Disconnect the 4P connector (A) f r o m the seat
heater.
Terminal side of male t e r m i n a l s
3. Check for continuity between the No. 2 and No. 3
terminals, and No. 3 and No. 4 terminals of the 4P
connector. There should be continuity.
4. If the continuity is not as specified, replace the seat
heater.
22-266