Honda ACCORD HYBRID 2005 Service Manual page 1131

V a l v e B o d y V a l v e I n s t a l l a t i o n
1. Coat all parts w i t h ATF before assembly.
2. Install the valves and springs in the sequence
s h o w n for the main valve body (see page 14-296),
secondary valve body (see page 14-298), regulator
valve body (see page 14-299), and accumulator
body (see page 14-300). Refer to the f o l l o w i n g
valve cap illustrations, and install each valve cap so
the end s h o w n facing up w i l l be facing the outside
of the valve body, then secure the valve cap w i t h
the valve cap clip.
3. Install the valve (A) and valve spring (B) in the valve
body. Push the valve spring in w i t h a screwdriver,
then install the spring seat (C).