Honda ACCORD HYBRID 2005 Service Manual page 1113

11. Shift the shift lever into the P position, and press
the brake pedal. Do not press the accelerator.
12. Measure the voltage between shift lock solenoid
connector terminals No. 1 and No. 2 w h i l e pressing
the brake pedal.
SHIFT LOCK S O L E N O I D C O N N E C T O R
IG1
(YEL) S L S (LT BLU)
W i r e side of f e m a l e t e r m i n a l s
Is there battery voltage?
YES—Check the shift lock m e c h a n i s m . If the
mechanism is OK, replace the shift lock solenoid
(see page 14-280). •
NO—Check for poor or loose PCM connector
terminal E22 at the PCM, and check for an open in
the wire between PCM connector terminal E22 and
shift lock solenoid connector. If the connection and
wire is OK, substitute a k n o w n - g o o d PCM, then
recheck. •