Usb Keyboard / Mouse; Led Functions; System Leds; Sys (System Status) Led - Honeywell Thor VM3 User Manual

The keyboard keys are backlit. The keyboard backlight is manually controlled using the backlight key in the upper right
hand corner of the keyboard. Pressing the backlight key cycles the keyboard backlight through the levels of backlight
intensity: Off, Low intensity, Medium intensity, Maximum intensity, Off, etc. When the Thor VM3 is powered on, the key-
board backlight defaults to Off.
Since the keyboard is a USB device, by default the external keyboard backlight is turned off when the Thor VM3 enters
Standby/Sleep. This behavior can be changed by enabling USB power in Standby/Sleep on the
control panel.

USB Keyboard / Mouse

A standard USB keyboard or mouse can be attached to the Thor VM3 using the appropriate adapter cable.
The Y cable attaches to the Thor VM3 and provides a USB connector. Please refer to documentation provided with the
USB keyboard or mouse for more information on their operation.

LED Functions

System LEDs

Programmable LED
System LEDs

SYS (System Status) LED

UPS (Uninterruptible Power Supply) LED
SSD (Solid State Drive) LED
SYS (System Status) LED
LED Behavior
Solid Green
Green blinking very slowly
External power present
(1/2 sec. on, 4 1/2 sec. off)
Off
External power present
Blue LED
System State
• On
• On but Display Off
•
• Off
Connection LEDs
Orange LED
Options (page 5-23)
3 - 9