Out Of The Box; Initial Setup For Thor Vm3; Hardware Setup; Software - Honeywell Thor VM3 User Manual

Out of the Box

The following items may be packaged separately:
• Thor VM3
• Quick Mount Smart Dock (includes 10-60VDC power cable)
• RAM or U-Bracket vehicle mount kit
If you ordered additional accessories for the Thor VM3, verify they are also included with the order. Keep the original packaging
material in the event the Thor VM3 should need to be returned for service. For details, see
1).

Initial Setup for Thor VM3

This page lists a quick outline of the steps you might take when setting up a new Thor VM3. More instruction for each step is
listed later in this guide.
Contact Technical Assistance

Hardware Setup

1. Install RAM Mount
2. Place Thor VM3 in the Dock
3. Connect Cables (page 1-23) for any peripherals.
4. Connect Power (page 1-24).
5. Secure all cables in
6. Press the Power Switch
7. Press the Power Button

Software

Languages

First Boot

When a new Thor VM3 starts up a EULA (End User License Agreement) may be displayed on the touch screen. It
remains on the screen until the Accept or Decline button is tapped with a stylus.
Tap the Accept button to accept the EULA terms and the Thor VM3 continues the startup process. The EULA is not
presented to the user again.
Tap the Decline button to decline the EULA and the Thor VM3 reboots. It will continue to reboot until the Accept but-
ton is tapped with the stylus.

Software Setup

Hardware setup should be completed before starting software setup.

Quick Mount Smart Dock

The Thor VM3 assembly consists of two parts, the Thor VM3 computer and the Quick Mount Smart Dock.
The Thor VM3 contains an internal UPS battery that, once fully charged, powers the Thor VM3 for a minimum of 30 minutes
when the unit is not mounted in the dock.
The dock provides:
• A mount for the Thor VM3 computer. The dock attaches to a vehicle via a RAM or U-bracket mount or to a RAM table stand
for use in an office environment.
• Conditioned power for the Thor VM3. The dock accepts 10-60VDC power input directly or 50-150VDC power input with a DC/
DC converter.
• COM1 and COM2 serial connections for a tethered scanner, printer, PC connection, etc.
• USB host connection via an adapter cable.
2 - 2
(page 6-1) if you need additional help.
(page 1-18) or Install U Bracket Mount
(page 1-16).
Strain Relief Cable Clamps
(page 3-4) on the dock to the on position.
(page 3-4) on the Thor VM3.
(page 1-23) to the vehicle.
(page 1-23).
Product Service and Repair (page 6-