CHAPTER 6: SETPOINTS
Preset statistics
339 MOTOR PROTECTION SYSTEM – INSTRUCTION MANUAL
These commands can be used to preset the motor statistic data on new installations or
existing installations where new equipment has been installed.
PATH:
SETPOINTS > S1 RELAY SETUP > PRESET STATISTICS
SET MOTOR STARTS
Range: 0 to 50000 in steps of 1
Default: 0
This command presets the number of motor starts.
SET EMERG RESTARTS
Range: 0 to 50000 in steps of 1
Default: 0
This command presets the number of motor emergency restarts.
SET RUNNING HOURS
Range: 0 to 65535 in steps of 1
Default: 0
This command presets the value of motor running hours.
S1 RELAY SETUP
6–49