Using The Quick Connect Feature - GE 339 Instruction Manual

CHAPTER 3: INTERFACES
Using the Quick
Connect feature
339 MOTOR PROTECTION SYSTEM – INSTRUCTION MANUAL
8. Click the Read Order Code button to connect to the device and upload the order
code.
9. Click OK when the relay order code has been received. The new device will be added
to the Site List window (or Online window) located in the top left corner of the main
window.
The Site Device has now been configured for USB communications. Proceed to Connecting
to the Relay below, to begin communications.
The Quick Connect button can be used to establish a fast connection through the front
panel USB port of a relay, or through the Ethernet port. The following window will appear
when the QuickConnect button is pressed:
SOFTWARE SETUP
3–15