3
Enter User ID/Pass
ID Key after Input
When done press ID key
User ID:User01
Password:
4
Password
123456
Set
Entry Mode: 12
NOTE
For instructions on entering characters, see "Entering Characters," on p. 2-6.
5
Press
(ID).
The Standby display appears.
NOTE
If the User ID or password that you enter is incorrect, the message <Unregistered
number. Enter number again.> will appear on the LCD display. Repeat this procedure
from step 1.
6
When your operations are complete, press
The display for entering the User ID appears.
NOTE
•
To perform operations again, you must re-enter your User ID and password.
•
If you do not press
copies, scans, or prints made are added to the total of the User ID you previously entered
to log on to the machine.
•
The display for entering the User ID and password automatically appears after the set
Auto Clear Time elapses. (See "Auto Clear Time," on p. 3-31.)
•
After pressing
display.
Use [
<Password:> ➞ press [OK].
Enter the user password using
or [
[OK].
(ID) after you are finished operating the machine, any subsequent
(ID), all settings are canceled, and the machine returns to the Standby
] or [
] to select
(numeric keys) ➞ use [
-
] to select <Set> ➞ press
(ID) to log out.
Entering a User ID and Password
2
]
2-13