Legal Notices; Product Name; Emc Directive; Laser Safety - Canon imageRUNNER 2320 Reference Manual

Legal Notices

Product Name

Safety regulations require the product's name to be registered. In some regions
where this product is sold, the following name(s) in ( ) may be registered instead.
imageRUNNER 2320/2318 (F190600)

EMC Directive

This equipment conforms with the essential requirements of EC Directive 2004/
108/EC.
We declare that this product conforms with the EMC requirements of EC Directive
2004/108/EC at nominal mains input 230V, 50Hz although the rated input of the
product is 220-240V, 50/60Hz.
Use of shielded cable is necessary to comply with the technical requirements of
EMC Directive.

Laser Safety

This product is certificated as a Class 1 laser product under IEC60825-1: 2007 and
EN60825-1: 2007. This means that the product does not produce hazardous laser
radiation.
Since radiation emitted inside the product is completely confined within protective
housings and external covers, the laser beam cannot escape from the machine
during any phase of user operation. Do not remove protective housings or external
covers, except as directed by the equipment's manual.

Additional Information

When servicing or adjusting the optical system of the product, be careful not to
place screwdrivers or other shiny objects in the path of the laser beam. Also,
accessories such as watches and rings should be removed before working on the
product. The reflected beam, whether visible or invisible, can permanently damage
your eyes.
The labels shown below are attached to the laser scanner unit inside the machine
and next to the toner cartridge behind the front cover.
xvii