Adjusting The Print Density - Canon imageRUNNER 2320 Reference Manual

2
Common Settings
3
Toner Save Mode
3
4
Press

Adjusting the Print Density

You can adjust the density scale if differences occur between the image on the
original and the print.
NOTE
The default setting is in the middle, '±0', on a scale of '-4' to '+4'.
1
Press
<Common Settings> ➞ press [OK].
For help, see the screen shots in step 2 of "Initial Function at Power ON," on p. 3-5.
The Common Settings menu appears.
2
Common Settings
3-10
Specifying Common Settings
Contrast
Invert Screen Colors
Auto Clear Setting
Toner Save Mode
Off
Low
High
(Reset) to return to the Standby display.
(Additional Functions) ➞ use [
Invert Screen Colors
Auto Clear Setting
Toner Save Mode
Printer Density
Use [ ] or [ ] to select <Toner
Save Mode> ➞ press [OK].
The Toner Save Mode menu appears.
Use [ ] or [ ] to select <Off>,
<Low>, or <High> ➞ press [OK].
The selected mode is set.
] or [ ] to select
Use [ ] or [ ] to select <Printer
Density> ➞ press [OK].
The Printer Density menu appears.