Adjusting A Paper Drawer To Hold A Different Paper Size - Canon imageRUNNER 2320 Reference Manual

Adjusting a Paper Drawer to Hold a Different
Paper Size
If you want to change the size of paper in a paper drawer, follow the procedure
described below to adjust the paper drawer guides.
NOTE
Please contact your Canon service representative about the settings for U1, U2, and U3
paper.
1
6
2
3
6-6
Paper Drawers
End Guide
Pull out the paper drawer, and
remove all the loaded paper.
Push down the metal plate to lock
it.
Detach the end guide and reattach
it to the slots aligned with the
mark indicating the desired paper
size.
Detach the end guide by pressing down and
forward. Align the end guide with the mark
indicating the desired paper size. Reattach
the end guide by tilting it forward and
inserting the tabs at both ends into the slots.
Then push the end guide up to return it to its
original vertical, upright position.