Setting The Gamma Value For Remote Scans - Canon imageRUNNER 2320 Reference Manual

Setting the Gamma Value for Remote Scans

You can set the gamma value that is used for scanning color documents into your
computer through the Network Scan function. Select a gamma value that is most
suited to your computer settings so that you can print the document from your
computer with the optimal density.
NOTE
•
For more information on the Network Scan function, see the Network ScanGear Guide.
•
The default setting is 'Gamma 1.8'.
3
1
Press
<Common Settings> ➞ press [OK].
For help, see the screen shots in step 2 of "Initial Function at Power ON," on p. 3-5.
The Common Settings menu appears.
2
Common Settings
3
Remote Scan Gamma
4
Press
3-26
Specifying Common Settings
(Additional Functions) ➞ use [
Language Switch
Dirty Feeder Error
Remote Scan Compress
Remote Scan Gamma
Gamma 1.0
Gamma 1.4
Gamma 1.8
Gamma 2.2
(Reset) to return to the Standby display.
] or [ ] to select
Use [ ] or [ ] to select <Remote
Scan Gamma> ➞ press [OK].
The Remote Scan Gamma menu appears.
Use [ ] or [ ] to select
<Gamma 1.0>, <Gamma 1.4>,
<Gamma 1.8>, or <Gamma 2.2> ➞
press [OK].
The selected mode is set.