Setting The System Manager's Name - Canon imageRUNNER 2320 Reference Manual

7
Password (Confirm)
NOTE
If you have entered a number different from the one set in step 6, you must set the
password over again. Repeat steps 6 and 7 until the screen returns to the System
Manager Set. menu.
8
Press
4

Setting the System Manager's Name

Follow the procedure below to set the System Manager's name.
1
Press
<System Settings> ➞ press [OK].
For help, see the screen shots in step 2 of "Setting System Manager ID and System
Password," on p. 4-2.
If the System Manager ID and System Password have already been set, enter the
System Manager ID and System Password using
The System Settings menu appears.
2
System Settings
4-4
Specifying the System Manager Settings
_
(Reset) to return to the Standby display.
(Additional Functions) ➞ use [
(ID).
System Manager Set.
Device Info Settings
Dept. ID Management
User ID Management
If the screen on the left appears,
enter the System Password again
to confirm ➞ press [OK].
The System Password is stored, and the
screen returns to the System Manager Set.
menu.
] or [ ] to select
(numeric keys) ➞ press
-
Use [ ] or [ ] to select <System
Manager Set.> ➞ press [OK].
The System Manager Set. menu appears.