Canon imageRUNNER 2320 Reference Manual page 264

This func. requires Optional equipment.
Cause
Remedy
This size cannot be stapled
Cause
Remedy
This size cannot be offset
Cause
Remedy
Toner low/Prepare new toner
Cause
7
Remedy
Tray A full/Remove paper
Cause
Remedy
Tray B full/Remove paper
Cause
Remedy
Waste toner full/Prepare drum
Cause
Remedy
7-36
List of Error Messages
The key has been pressed when the machine is not equipped with the
optional network kit.
To make the scanning function available, the optional network kit is required.
The machine cannot staple the printouts because the selected paper size is
unavailable for stapling.
Use the suitable paper size for stapling. (See Chapter 2, "Advanced
Operations," in the Copying Guide.)
The machine cannot offset the printouts because the selected paper size is
unavailable for offset copying.
Use the suitable paper size for offset copying. (See Chapter 2, "Advanced
Operations," in the Copying Guide.)
Toner is running out.
Rock the toner cartridge to redistribute the toner evenly inside the cartridge. If
the message persists, install a new cartridge.
Tray A is full of paper.
Remove the prints from Tray A. (See "Inner 2 Way Tray-E2," on p. 5-10.)
Tray B is full of paper.
Remove the prints from Tray B. (See "Inner 2 Way Tray-E2," on p. 5-10.)
Waste toner is full in the drum.
Replace the drum unit. (See "Replacing the Drum Unit," on p. 6-16)