Remote Ui - Canon imageRUNNER 2320 Reference Manual

Remote UI

If the network connection is available, you can set whether to enable the Remote UI
(User Interface) to operate the machine and change settings via the network.
Once the Ethernet interface port is configured properly, the machine can be
controlled and set up through the Remote UI.
IMPORTANT
The Remote UI is available only when the optional Network Kit is attached to the
machine.
4
NOTE
•
For more information on the Remote UI, see the Remote UI Guide.
•
For instructions on configuring the Ethernet port, see the Network Guide.
•
The default setting is 'On'.
1
Press
The Additional Functions menu appears.
2
Additional Functions
3
System Settings
4-32

Remote UI

(Additional Functions).
Timer Settings
Adjustment/Cleaning
Report Settings
System Settings
Dept. ID Management
User ID Management
Network Settings
Remote UI On/Off
Use [ ] or [ ] to select <System
Settings> ➞ press [OK].
If the System Manager ID and System
Password have already been set, enter the
System Manager ID and System Password
(numeric keys) ➞ press
using -
(ID).
The System Settings menu appears.
Use [ ] or [ ] to select <Remote
UI On/Off> ➞ press [OK].
The Remote UI On/Off menu appears.