Canon imageRUNNER 2320 Reference Manual page 171

4
Remote UI On/Off
Off
On
5
Press (Reset) to return to the Standby display.
6
Restart the machine.
Turn OFF the machine, wait at least 10 seconds, and then turn it ON.
NOTE
The Remote UI is enabled only after you restart the machine. For instructions on how to
turn the machine ON and OFF, see "How to Turn ON the Main Power," on p. 1-14.
Use [ ] or [ ] to select <Off> or
<On> ➞ press [OK].
Details of each item are as follows:
<Off>
Settings cannot be specified and the
machine cannot be operated through the
Remote UI.
<On>
Settings can be specified and the machine
can be operated through the Remote UI.
The selected mode is set.
4-33
Remote UI
4