Feeder Smudge Adjustment - Canon imageRUNNER 2320 Reference Manual

4
Press

Feeder Smudge Adjustment

If the feeder is dirty, dots or lines may appear on copies or prints. The Dirty Feeder
Adjustment mode prevents dirt and grime in the feeder from appearing on your
prints and copies.
NOTE
•
This mode is available only if the optional feeder (DADF-P2) is attached to the machine.
•
While some dots or lines may continue to be printed when the Dirty Feeder Adjustment
mode is set to 'On', copies are significantly clearer than when it is set to 'Off'.
•
The default setting is 'On'.
1
Press
<Adjustment/Cleaning> ➞ press [OK].
For help, see the screen shots in step 2 of "Setting the Fixing Mode for Bond Paper," on
p. 3-33.
The Adjustment/Cleaning menu appears.
2
Adjustment/Cleaning
Special Mode P
Special Mode S
Rotate Collate Adj.
Dirty Feeder Adj.
3
Dirty Feeder Adj.
Off
On
4
Press
(Reset) to return to the Standby display.
(Additional Functions) ➞ use [
(Reset) to return to the Standby display.
] or [ ] to select
Use [ ] or [ ] to select <Dirty
Feeder Adj.> ➞ press [OK].
The Dirty Feeder Adj. menu appears.
Use [ ] or [ ] to select <Off> or
<On> ➞ press [OK].
The selected mode is set.
Adjusting the Machine
3
3-41