Canon imageRUNNER 2320 Reference Manual page 63

3
Press (ID).
The Standby display appears.
NOTE
If the Department ID or password that you enter is incorrect, the message <Unregistered
number. Enter number again.> appears on the LCD display. In this case, repeat this
procedure from step 1.
4
When your operations are complete, press
The display for entering the Department ID appears.
NOTE
•
To perform operations again, you have to re-enter your Department ID and password.
•
If you do not press
copies, scans, or prints made are added to the total of the Department ID you previously
entered to log on to the machine.
•
The display for entering the Department ID and password automatically appears after the
set Auto Clear Time elapses. (See "Auto Clear Time," on p. 3-31.)
•
After pressing
display.
(ID) after you are finished operating the machine, any subsequent
(ID), all settings are canceled, and the machine returns to the Standby
Entering the Department ID and Password
(ID) to log out.
2-11
2