About Provisioning Mode; Scan A Bar Code With The Scan Demo - Honeywell Dolphin CT40 Quick Start Manual

About Provisioning Mode

After completing the out-of-box set up process, Provisioning
mode is automatically turned off. Scanning a bar code to install
applications, certificates, configuration files, and licenses on
the computer is restricted unless you enable Provisioning mode
in the Settings app. To learn more, see the user guide.

Scan a Bar Code with the Scan Demo

For optimum performance, avoid reflections by scanning the
bar code at a slight angle.
1. Touch
Scan Demo.
2. Point the computer at
the bar code.
3. Touch Scan on the
screen or press and
hold any Scan button.
Center the aiming beam
over the bar code.
The decode results appear
on the screen.
Note: In the Scan Demo app, not all bar code symbologies are enabled
by default. If a bar code does not scan, the correct symbology may
not be enabled. To learn how to modify the default app settings,
see the user guide.
> Demos >
13