Monitored Data; Phase Current Measurement Cmmxu; Identification; Function Block - ABB REG650 Technical Manual

1MRK 502 034-UEN -
Name Values (Range)
IAngComp5
IAngComp30
IAngComp100
13.4.2.5
13.4.3
13.4.3.1
13.4.3.2
Technical Manual
Unit
-10.000 - 10.000 Deg
-10.000 - 10.000 Deg
-10.000 - 10.000 Deg

Monitored data

Table 282: CVMMXN Monitored data
Name
S
P
Q
PF
U
I
F

Phase current measurement CMMXU

Identification

Function description
Phase current measurement

Function block

The available function blocks of an IED are depending on the actual hardware
(TRM) and the logic configuration made in PCM600.
Step Default
0.001 0.000
0.001 0.000
0.001 0.000
Type Values (Range)
REAL -
REAL -
REAL -
REAL -
REAL -
REAL -
REAL -
IEC 61850
identification
CMMXU
Section 13
Monitoring
Description
Angle calibration for current at 5% of Ir
Angle calibration for current at 30% of Ir
Angle calibration for current at 100% of Ir
Unit Description
MVA Apparent power
magnitude of deadband
value
MW Active power magnitude
of deadband value
MVAr Reactive power
magnitude of deadband
value
- Power factor magnitude
of deadband value
kV Calculated voltage
magnitude of deadband
value
A Calculated current
magnitude of deadband
value
Hz System frequency
magnitude of deadband
value
IEC 60617 ANSI/IEEE C37.2
identification device number
-
I
SYMBOL-SS V1 EN
357