Section 11
Control
11.4
11.4.1
11.4.2
11.4.3
302
desired position directly (without activating the intermediate positions), either
locally or remotely, using a "select before execute" dialog. One can block the
function operation, by activating the BLOCK input. In this case, the present
position will be kept and further operation will be blocked. The operator place
(local or remote) is specified through the PSTO input. If any operation is allowed
the signal INTONE from the Fixed signal function block can be connected.
SLGGIO function block has also an integer value output, that generates the actual
position number. The positions and the block names are fully settable by the user.
These names will appear in the menu, so the user can see the position names
instead of a number.
Selector mini switch VSGGIO
Identification
Function description
Selector mini switch
Functionality
The Selector mini switch VSGGIO function block is a multipurpose function used
for a variety of applications, as a general purpose switch.
VSGGIO can be controlled from the menu or from a symbol on the single line
diagram (SLD) on the local HMI.
Function block
VSGGIO
BLOCK
BLOCKED
PSTO
POSITION
IPOS1
POS1
IPOS2
POS2
CMDPOS12
CMDPOS21
IEC09000341-1-en.vsd
IEC09000341 V1 EN
IEC 61850
IEC 60617
identification
identification
VSGGIO
-
1MRK 502 034-UEN -
ANSI/IEEE C37.2
device number
-
Technical Manual