Connect To The Network; Connect To A Wi-Fi Network - Cisco 8811 User Manual

Connect to the Network

The footstand tabs are made of a flexible material.
Procedure
Step 1 Hold the receiver in the cradle with one hand.
Step 2
Move the footstand with the other hand to change the angle.
Step 3 (Optional) Adjust the footstand on the key expansion module and ensure that the phone and key expansion
module are stable.
Step 4
(Optional) Press Self-view to check the camera angle.
Connect to the Network
Your phone needs to be connected to the telephone network.
• Wired connection—The phone is plugged into the network using an Ethernet cable.
• Wireless connection—The phone connects to a Wireless Access Point using Wi-Fi.
• Virtual Private Network (VPN)—After the phone is connected to the network, it is set up to automatically
• Mobile and Remote Access through Expressway—After the phone is connected to the network, it is set

Connect to a Wi-Fi Network

The Cisco IP Phone 8861 and 8865 can access a Wi-Fi network. To use the phone in a Wi-Fi network, you
must use a power adaptor to power the phone.
Before You Begin
Your administrator needs to configure settings on the call control system to enable Wi-Fi access.
Procedure
Step 1 If the phone is plugged into the Ethernet, unplug the Ethernet cable.
Step 2
Press Applications
Step 3
Navigate to Admin settings > Network setup > Wi-Fi client setup > Wi-Fi sign in access.
Step 4 Navigate to Wireless and press On.
Step 5 Navigate to Wi-Fi sign in access and press On.
Step 6 Press Apply to save the changes, or press Revert to cancel the changes.
Cisco IP Phone 8800 Series User Guide
4
connect into a protected network.
up to automatically connect to the Expressway server.
.
Your Phone