Put A Call On Hold; Answer A Call Left On Hold For Too Long; Swap Between Active And Held Calls; Call Park - Cisco 8811 User Manual

Put a Call on Hold

Put a Call on Hold
Procedure
Step 1
Press Hold
Step 2 To resume a call from hold, press Hold again.

Answer a Call Left on Hold for Too Long

You can be notified when a call is left on hold. The notification is similar to an incoming call notification and
includes these cues:
• Single ring, repeating at intervals
• Flashing amber line button
• Flashing message indicator on the handset
• Visual notification on the phone screen
Procedure
Press the flashing amber line button or Answer to resume the held call.

Swap Between Active and Held Calls

Procedure
Press Swap for the held call.

Call Park

You can use your phone to park (temporarily store) a call. You can then retrieve the call from another phone
(such as a phone at a coworker's desk or in a conference room).
There are two ways you can park a call: park and directed call park. You'll only have one type of call park
available on your phone.
If the call remains parked for too long, you receive an alert tone. You can answer the call or retrieve it from
another phone. If you do not answer the call within a certain length of time, it is routed to another destination
(such as voicemail), as set by your administrator.
Cisco IP Phone 8800 Series User Guide
32
.
Calls