Adjust The Picture-In-Picture Position; Video Calls And Security; Mute Your Audio; Hold Calls - Cisco 8811 User Manual

Calls

Adjust the Picture-In-Picture Position

When you are on a video call, you can view both your incoming and your outgoing video at the same time.
Procedure
Step 1 Press PiP to activate.
Step 2 Press PiP again to move the PiP window counter-clockwise around your phone screen.
Step 3
(Optional) Press Swap to toggle between the full-screen view and the PiP view.
Step 4 (Optional) Disable PiP by returning the PiP window to the default lower right position.

Video Calls and Security

Your administrator can take steps to protect your video calls from tampering by people outside your company.
If you see the Secure icon displayed during a video call, your administrator has taken steps to ensure your
privacy.
Related Topics
Secure Calls, on page 25

Mute Your Audio

Procedure
Step 1
Press Mute
Step 2 Press Mute again to turn mute off.

Hold Calls

You can put an active call on hold and pick up the held call. When you place a video call on hold, video
transmission is blocked until you resume the call.
.
Adjust the Picture-In-Picture Position
Cisco IP Phone 8800 Series User Guide
31