Phone Setup; Adjust The Handset Rest; Change The Viewing Angle Of Your Phone - Cisco 8811 User Manual

Your Phone

Phone Setup

Typically, your administrator sets up your phone and connects it to the network. If your phone is not setup
and connected, contact your administrator for instructions.

Adjust the Handset Rest

If your phone is wall-mounted or if the handset slips out of the cradle too easily, you may need to adjust the
handset rest to ensure that the receiver does not slip out of the cradle.
Procedure
Step 1
Remove the handset from the cradle and pull the plastic tab from the handset rest.
Step 2 Rotate the tab 180 degrees.
Step 3 Hold the tab between two fingers, with the corner notches facing you.
Step 4 Line up the tab with the slot in the cradle and press the tab evenly into the slot. An extension protrudes from
the top of the rotated tab.
Step 5 Return the handset to the handset rest.

Change the Viewing Angle of Your Phone

You can change the angle of the phone to eliminate glare on the screen. For the Cisco IP Phones 8845 and
8865, you might need to change the angle to improve the camera view.
Phone Setup
Cisco IP Phone 8800 Series User Guide
3