Table of Contents
Advertisement
F-24 Installing Windows Server 2003
Installing RAID Controller Driver (N8103-115)
The installation procedure depends on your environment.
Follow steps below appropriate to your environment.
If the Internal RAID Controller (equivalent to N8103-116A) or N8103-116A/117A/118A
is used:
You do not need to install the driver manually. It is automatically installed by Windows Plug-and-
Play.
If the Internal RAID Controller (equivalent to N8103-116A) or N8103-116A/117A/118A
is not used:
Install the driver by the following procedures.
1.
Start [Device Manager] from [Start] menu → [Control Panel] → [Administrative Tools]
→ [Computer Management].
2.
Double-click the RAID Controller which Device Manager lists as Other device.
3.
Click [Update Driver].
4.
When the "Update Device Driver Wizard" appears, select "No, not this time" and click
[Next].
5.
Select "Install from a list or specific location [Advanced]" and click [Next].
6.
Select "Don't search. I will choose the driver to install" and click [Next].
7.
Select "SCSI and RAID controller" and click [Next].
8.
Click [Have Disk..].
9.
Insert "NEC EXPRESSBUILDER DVD" into the optical disk drive, enter "<drive
letter>:\010\win\winnt\oemfd\dotnet\fd1" into "Copy manufacturer's file from:" and click
[OK].
10.
Specify the following driver and click [Next].
– [LSI Logic MegaRAID SAS 8880EM2 RAID Controller]
The installation of the driver is completed. Restart the system.
Advertisement
Table of Contents
