Table of Contents
Advertisement
1.
See the section "Preparing for Installation and Removal" as described in Chapter 9 of this
guide to prepare.
2.
Remove the left side cover (see Chapter 9).
3.
Remove a setscrew from the duct cover, and remove a duct cover.
4.
Locate the position of the RAID configuration jumper on the mother board as shown
below.
5.
Install the duct cover removed in Step 3, and secure it with a setscrew.
6.
Install the left side cover removed in Step 2.
Configuring Your Server 4-31
RAID configuration
jumper switch
Disable
Enable
Advertisement
Table of Contents
