Table of Contents
Advertisement
Upgrading Your Server 9-7
Installation
The side cover can be installed in the reverse procedure of the removal. Make sure that the hooks on
the side cover are inserted into the frame holes of the server certainly. When you install the cover by
sliding the cover toward the front of the server, also make sure that the hooks on the front side are
engaged with the frame of the server. Otherwise, you will fail to install the cover securely.
Frame holes
Hooks
Insert a lock plate here.
Hooks
Lock plate
Frame holes
Rear of the left side cover
Frame of the server
Finally, install the left side cover and secure it with two screws removed in step 5 of removal
procedure.
Screws
Advertisement
Table of Contents
