Table of Contents
Advertisement
9-12 Upgrading Your Server
NOTES:
Make sure of the orientation of the hard disk drive tray before
inserting it into the cage according to the figure shown above. Also
make sure that the hooks of the hard disk drive are engaged with the
frame of the HDD cage.
The slots of the HDD cage contain trays without hard disk drive. To
install the hard disk drive, first remove the tray according to the
removal procedure described later.
Install a hard disk drive tray to the vacant slot of the cage to keep
the cooling effect of the server.
To remove the hard disk drive carrier, push the green tab on the lever and open the lever
toward you until it stops. Then, the hard disk drive tray is unlocked.
Securely hold the tray and the lever and insert the tray straight into the HDD cage.
IMPORTANT:
server is powered on destroys the logical disk. Remove or replace the
hard disk drive one by one.
4.
Close the front mask.
Removing more than one hard disk drive while the
Advertisement
Table of Contents
